Standard connection base BS
Standard connection base for detectors and cameras
Standard connection base for detectors in the AC, AX and JN ranges. Colour: white. Dimensions: 100 mm Ø x 9 mm.
Specifications
Downloads
Productos relacionados
LX1 1-Loop Algorithmic Detection Panel
1-loop algorithmic detection panel with capacity for up to 250 devices. USB/Bluetooth/Ethernet/WiFi/4G touchscreen display.
1-loop algorithmic detection panel with capacity for up to 250 devices, a 2.7″ multi-language TFT touchscreen display with up to 10,000 event logs, and 2 supervised 24V programmable I/O. 300mA. 2 independent relay outputs for alarm/fault. Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required.
Communications for remote management and access to the Nusku® platform via included Ethernet and Wi-Fi ports, with optional 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 360 mm x 400 mm x 100 mm. CPR certified EN54-2, EN54-4, EN54-13 and EN54-21. Requires two 12 V/7 Ah batteries (not included).
N4IO 4-Contact Expansion Card
4-Programmable I/O Contact Expansion Card
Expansion card with 4 programmable contacts, configurable as inputs for receiving technical signals from NO or NC contacts, or as relay outputs programmable as NO or NC contacts. Max. 1A per contact. Compatible with BX1-4PRO and BX1-7MAX panels.
Specifications
Downloads
Resettable analogue alarm push button WXCP
Red resettable analogue alarm button with LED and cover
Red resettable analogue alarm push button with LED and cover, surface mounting, CPR EN54-1 certified. Addressing via QR code reading and built-in short-circuit isolator.
Specifications
Downloads
Conventional detection panel for NETCOM® 4-zone network RAX CX4
Conventional detection panel for NETCOM® 4-zone network. USB/Bluetooth/WiFi/4G.
Conventional detection panel for NETCOM® network with 4 zones up to 32 elements per zone, discriminating between push-button and detector alarms, 2.7″ multi-language TFT touch screen with up to 10,000 event log entries, 2 programmable 24V supervised I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 200 mm x 290 mm x 80 mm. CPR EN54-2, EN54-4, EN54-13 and EN54-21 certified. Requires two 12 V/2 Ah batteries (not included).
