Connection base for exposed pipe BSA
Connection base for exposed pipe for detectors and camera
Connection base for 20 mm exposed pipe for detectors in the AC, AX and JN ranges. Colour: white. Dimensions: 100 mm Ø x 28 mm.
Specifications
Downloads
Productos relacionados
Conventional detection panel for NETCOM® 4-zone network RAX CX4
Conventional detection panel for NETCOM® 4-zone network. USB/Bluetooth/WiFi/4G.
Conventional detection panel for NETCOM® network with 4 zones up to 32 elements per zone, discriminating between push-button and detector alarms, 2.7″ multi-language TFT touch screen with up to 10,000 event log entries, 2 programmable 24V supervised I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 200 mm x 290 mm x 80 mm. CPR EN54-2, EN54-4, EN54-13 and EN54-21 certified. Requires two 12 V/2 Ah batteries (not included).
LX1C 1-Loop Algorithmic Detection Panel
1-loop algorithmic detection panel with capacity for up to 120 devices. USB/Bluetooth/Ethernet/WiFi/4G touchscreen display.
1-loop algorithmic detection panel with capacity for up to 120 devices, 2.7″ multi-language TFT touchscreen display with logging for up to 10,000 events, 2 programmable supervised 24V I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via on-board USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via included Ethernet and Wi-Fi ports, and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic housing for surface or flush mounting. Dimensions: 200mm x 290mm x 80mm. CPR EN54-2, EN54-4, EN54-13, and EN54-21 certified. Two 12V/2Ah batteries required, not included.
7I analogue module MMX7I
7-input analogue module
Analogue multi-module with 7 programmable inputs for receiving technical signals from NO or NC contacts. For installation in LX and BX panel loops. Occupies 7 addresses in the loop. No external power supply required.
Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 7 addresses in the loop and has a built-in short-circuit isolator.
LX2 2-loop algorithmic detection panel
2-loop algorithmic detection panel with capacity for up to 250 devices per loop. USB/Bluetooth/Ethernet/Wi-Fi/4G touch display.
2-loop algorithmic detection panel with capacity for up to 250 devices per loop, 2.7″ multi-language TFT touch screen with a log of up to 10,000 events, and 2 supervised 24V programmable I/Os. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via on-board USB and/or Bluetooth without the need for an additional card. Communications for remote management and access to the Nusku® platform via included Ethernet and Wi-Fi ports, and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic housing for surface or flush mounting. Dimensions 360mm. x 400mm. x 100mm. CPR EN54-2, EN54-4, EN54-13, and EN54-21 certified. Two 12V/2Ah batteries required, not included.
