Standard connection base BSN
Standard connection base for detectors and camera, black colour
Standard connection base for detectors in the AC, AX and JN ranges. Colour: black. Dimensions: 100 mm Ø x 9 mm.
Specifications
Downloads
Productos relacionados
Analogue module 3 I/O MDX3IO
Analogue module with 3 technical inputs or 3 relay outputs
Analogue module with 3 programmable contacts as inputs for receiving technical signals from NO or NC contacts or programmable relay outputs as NO or NC contacts. Max. current 1A per contact. For installation in LX and BX panel loops. Occupies 3 addresses in the loop. No external power supply required.
Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 3 addresses in the loop and has a built-in short-circuit isolator.
Conventional detection panel for NETCOM® 4-zone network RAX CX4
Conventional detection panel for NETCOM® 4-zone network. USB/Bluetooth/WiFi/4G.
Conventional detection panel for NETCOM® network with 4 zones up to 32 elements per zone, discriminating between push-button and detector alarms, 2.7″ multi-language TFT touch screen with up to 10,000 event log entries, 2 programmable 24V supervised I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 200 mm x 290 mm x 80 mm. CPR EN54-2, EN54-4, EN54-13 and EN54-21 certified. Requires two 12 V/2 Ah batteries (not included).
2-zone analogue module MDX2Z
Analogue module with 2 conventional detection zones
Analogue module with 2 conventional detection zones. For installation in LX and BX panel loops. No external power supply required. Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 2 addresses in the loop and has a built-in short-circuit isolator.
N4IO 4-Contact Expansion Card
4-Programmable I/O Contact Expansion Card
Expansion card with 4 programmable contacts, configurable as inputs for receiving technical signals from NO or NC contacts, or as relay outputs programmable as NO or NC contacts. Max. 1A per contact. Compatible with BX1-4PRO and BX1-7MAX panels.
