Showing 21–37 of 37 resultsSorted by latest
Mini analogue module with 1 relay output MOXO
Mini analogue module with 1 relay output
Mini analogue module with 1 relay output programmable as NO or NC contact. Max. current 1A. For installation in LX and BX panel loops. No external power supply required. Supplied with white box. Dimensions 40mm x 40mm x 20mm. Addressing via QR code reading and built-in short-circuit isolator.
2-zone analogue module MDX2Z
Analogue module with 2 conventional detection zones
Analogue module with 2 conventional detection zones. For installation in LX and BX panel loops. No external power supply required. Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 2 addresses in the loop and has a built-in short-circuit isolator.
Analog module with 3 inputs MDX3I
Technical 3-input analogue module
Analogue module with 3 programmable inputs for receiving technical signals from NO or NC contacts. For installation in LX and BX panel loops. Occupies 3 addresses in the loop. No external power supply required.
Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 3 addresses in the loop and has a built-in short-circuit isolator.
Analogue module 3 I/O MDX3IO
Analogue module with 3 technical inputs or 3 relay outputs
Analogue module with 3 programmable contacts as inputs for receiving technical signals from NO or NC contacts or programmable relay outputs as NO or NC contacts. Max. current 1A per contact. For installation in LX and BX panel loops. Occupies 3 addresses in the loop. No external power supply required.
Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 3 addresses in the loop and has a built-in short-circuit isolator.
Analogue module with 7 inputs/outputs MMX7IO
Analogue module with 7 technical inputs or 7 relay outputs
Analogue multi-module with 7 contacts programmable as inputs for receiving technical signals from NO or NC contacts or relay outputs programmable as NO or NC contacts. Max. current 1A per contact. For installation in LX and BX panel loops. Occupies 7 addresses in the loop. No external power supply required.
Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 2 addresses in the loop and has a built-in short-circuit isolator.
7I analogue module MMX7I
7-input analogue module
Analogue multi-module with 7 programmable inputs for receiving technical signals from NO or NC contacts. For installation in LX and BX panel loops. Occupies 7 addresses in the loop. No external power supply required.
Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 7 addresses in the loop and has a built-in short-circuit isolator.
Analogue CO and NO2 detection panel for NETCOM® 2-zone network RAX JNBUS
Analogue CO and NO2 detection panel for NETCOM® 1-loop network, touchscreen display, USB/Bluetooth/WiFi/4G.
Analogue CO and NO2 detection panel for NETCOM® 1-loop network with capacity to combine up to 120 analogue CO, NO2 or dual CO-NO2 detectors, pre-alarm and alarm output via 220Vacc relay from loop through 2 or 4 output modules (Ref. JNR2 or JNR4) with direct connection to EH-SYNC® panel network, 2.7″ multi-language TFT touch screen with up to 10,000 event log. 2 supervised programmable 24V I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning from the panel itself or via on-board USB and/or Bluetooth ports using the Tools® app, without the need for additional cards. MODBUS protocol available via Ethernet port. Wi-Fi port included and optional 4G module (ref. W4G) for remote management and access to the Nusku® platform.
White RAL 9010 ABS plastic housing for surface or flush mounting. Dimensions: 200mm x 290mm x 80mm. CPR EN54-2, EN54-4, EN54-13, and EN54-21 certified. Space for two 12V/7Ah batteries (not included).
“
Conventional CO detection panel for NETCOM® 2-zone network RAX JN1
Conventional CO detection panel for NETCOM® 2-zone network, touchscreen display, USB/Bluetooth/WiFi/4G.
Conventional CO detection panel for NETCOM® network with 2 zones, up to 32 elements per zone, and pre-alarm and alarm output via 220Vac relay, 2.7″ multi-language TFT touchscreen with up to 10,000 event log entries, 2 programmable 24V monitored I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic housing for surface or flush mounting. Dimensions: 200mm x 290mm x 80mm. CPR EN54-2, EN54-4, EN54-13, and EN54-21 certified. Space for two 12V/2Ah batteries not included.
“
Conventional detection panel for NETCOM® 4-zone network RAX CX4
Conventional detection panel for NETCOM® 4-zone network. USB/Bluetooth/WiFi/4G.
Conventional detection panel for NETCOM® network with 4 zones up to 32 elements per zone, discriminating between push-button and detector alarms, 2.7″ multi-language TFT touch screen with up to 10,000 event log entries, 2 programmable 24V supervised I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 200 mm x 290 mm x 80 mm. CPR EN54-2, EN54-4, EN54-13 and EN54-21 certified. Requires two 12 V/2 Ah batteries (not included).
Resettable analogue alarm push button WXCP
Red resettable analogue alarm button with LED and cover
Red resettable analogue alarm push button with LED and cover, surface mounting, CPR EN54-1 certified. Addressing via QR code reading and built-in short-circuit isolator.
Resettable analogue alarm push button WXCPIP
Red resettable analogue alarm push button with LED and cover for outdoor use, IP65
Resettable analogue red alarm call point with LED and cover, surface-mounted, CPR EN54-1 certified. IP65. Addressing via QR code reading and features a built-in short-circuit isolator.
Indoor Analogue Siren WXPSF
Indoor analogue siren, optical and acoustic, red with white flash
Red analogue indoor optical acoustic siren, white flash. Acoustic level from 89 to 105db, 44 x 118 x 106 mm, CPR EN 54-3 and EN 54-23 certified. Addressing via QR code reading and built-in short-circuit isolator.
TLBX 1-loop algorithmic expansion card
1-loop algorithmic detection expansion card
1-loop algorithmic detection expansion card with capacity for 350 devices per loop. Compatible with BX1-4PRO and BX1-7PRO panels.
N4IO 4-Contact Expansion Card
4-Programmable I/O Contact Expansion Card
Expansion card with 4 programmable contacts, configurable as inputs for receiving technical signals from NO or NC contacts, or as relay outputs programmable as NO or NC contacts. Max. 1A per contact. Compatible with BX1-4PRO and BX1-7MAX panels.
Communications card W4G
4G communications card
4G communications card, contact ID protocol, compatible with all EHOX panels. Requires data card. EN54-21 certified.
Communication card W4GV
4G communications card + voice and data
4G communications card + voice and data equipped with microphone and speaker, contact ID protocol, compatible with all EHOX panels. Requires voice and data card. EN54-22 certified.
NETCOM network cardT-NETCOM
NETCOM network card
NETCOM® network communication card, allows panels to be connected in a ring or closed bus, compatible with BX1-4PRO, BX1-7MAX, and JN1-4PRO panels.
