Indoor Analogue Siren WXPSF
Indoor analogue siren, optical and acoustic, red with white flash
Red analogue indoor optical acoustic siren, white flash. Acoustic level from 89 to 105db, 44 x 118 x 106 mm, CPR EN 54-3 and EN 54-23 certified. Addressing via QR code reading and built-in short-circuit isolator.
Specifications
Downloads
Productos relacionados
LX2 2-loop algorithmic detection panel
2-loop algorithmic detection panel with capacity for up to 250 devices per loop. USB/Bluetooth/Ethernet/Wi-Fi/4G touch display.
2-loop algorithmic detection panel with capacity for up to 250 devices per loop, 2.7″ multi-language TFT touch screen with a log of up to 10,000 events, and 2 supervised 24V programmable I/Os. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via on-board USB and/or Bluetooth without the need for an additional card. Communications for remote management and access to the Nusku® platform via included Ethernet and Wi-Fi ports, and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic housing for surface or flush mounting. Dimensions 360mm. x 400mm. x 100mm. CPR EN54-2, EN54-4, EN54-13, and EN54-21 certified. Two 12V/2Ah batteries required, not included.
Conventional detection panel for NETCOM® 4-zone network RAX CX4
Conventional detection panel for NETCOM® 4-zone network. USB/Bluetooth/WiFi/4G.
Conventional detection panel for NETCOM® network with 4 zones up to 32 elements per zone, discriminating between push-button and detector alarms, 2.7″ multi-language TFT touch screen with up to 10,000 event log entries, 2 programmable 24V supervised I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 200 mm x 290 mm x 80 mm. CPR EN54-2, EN54-4, EN54-13 and EN54-21 certified. Requires two 12 V/2 Ah batteries (not included).
Communication card W4GV
4G communications card + voice and data
4G communications card + voice and data equipped with microphone and speaker, contact ID protocol, compatible with all EHOX panels. Requires voice and data card. EN54-22 certified.
Specifications
Downloads
N4IO 4-Contact Expansion Card
4-Programmable I/O Contact Expansion Card
Expansion card with 4 programmable contacts, configurable as inputs for receiving technical signals from NO or NC contacts, or as relay outputs programmable as NO or NC contacts. Max. 1A per contact. Compatible with BX1-4PRO and BX1-7MAX panels.
