Indoor Analogue Siren WXPSF
Indoor analogue siren, optical and acoustic, red with white flash
Red analogue indoor optical acoustic siren, white flash. Acoustic level from 89 to 105db, 44 x 118 x 106 mm, CPR EN 54-3 and EN 54-23 certified. Addressing via QR code reading and built-in short-circuit isolator.
Specifications
Downloads
Productos relacionados
Mini Analog Module 1I MOXI
Mini analogue module with 1 technical input
Mini analogue module with 1 programmable input for receiving technical signals from NO or NC contacts. For installation in LX and BX panel loops. No external power supply required. Supplied with white box. Dimensions 40 mm x 40 mm x 20 mm. Addressing via QR code reading and built-in short-circuit isolator.
Specifications
Downloads
LX2 2-loop algorithmic detection panel
2-loop algorithmic detection panel with capacity for up to 250 devices per loop. USB/Bluetooth/Ethernet/Wi-Fi/4G touch display.
2-loop algorithmic detection panel with capacity for up to 250 devices per loop, 2.7″ multi-language TFT touch screen with a log of up to 10,000 events, and 2 supervised 24V programmable I/Os. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via on-board USB and/or Bluetooth without the need for an additional card. Communications for remote management and access to the Nusku® platform via included Ethernet and Wi-Fi ports, and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic housing for surface or flush mounting. Dimensions 360mm. x 400mm. x 100mm. CPR EN54-2, EN54-4, EN54-13, and EN54-21 certified. Two 12V/2Ah batteries required, not included.
Resettable analogue alarm push button WXCPIP
Red resettable analogue alarm push button with LED and cover for outdoor use, IP65
Resettable analogue red alarm call point with LED and cover, surface-mounted, CPR EN54-1 certified. IP65. Addressing via QR code reading and features a built-in short-circuit isolator.
Specifications
Downloads
Analogue module with 7 inputs/outputs MMX7IO
Analogue module with 7 technical inputs or 7 relay outputs
Analogue multi-module with 7 contacts programmable as inputs for receiving technical signals from NO or NC contacts or relay outputs programmable as NO or NC contacts. Max. current 1A per contact. For installation in LX and BX panel loops. Occupies 7 addresses in the loop. No external power supply required.
Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 2 addresses in the loop and has a built-in short-circuit isolator.
