LX2 2-loop algorithmic detection panel
2-loop algorithmic detection panel with capacity for up to 250 devices per loop. USB/Bluetooth/Ethernet/Wi-Fi/4G touch display.
2-loop algorithmic detection panel with capacity for up to 250 devices per loop, 2.7″ multi-language TFT touch screen with a log of up to 10,000 events, and 2 supervised 24V programmable I/Os. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via on-board USB and/or Bluetooth without the need for an additional card. Communications for remote management and access to the Nusku® platform via included Ethernet and Wi-Fi ports, and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic housing for surface or flush mounting. Dimensions 360mm. x 400mm. x 100mm. CPR EN54-2, EN54-4, EN54-13, and EN54-21 certified. Two 12V/2Ah batteries required, not included.
Productos relacionados
Conventional detection panel for NETCOM® 4-zone network RAX CX4
Conventional detection panel for NETCOM® 4-zone network. USB/Bluetooth/WiFi/4G.
Conventional detection panel for NETCOM® network with 4 zones up to 32 elements per zone, discriminating between push-button and detector alarms, 2.7″ multi-language TFT touch screen with up to 10,000 event log entries, 2 programmable 24V supervised I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 200 mm x 290 mm x 80 mm. CPR EN54-2, EN54-4, EN54-13 and EN54-21 certified. Requires two 12 V/2 Ah batteries (not included).
Mini Analog Module 1I MOXI
Mini analogue module with 1 technical input
Mini analogue module with 1 programmable input for receiving technical signals from NO or NC contacts. For installation in LX and BX panel loops. No external power supply required. Supplied with white box. Dimensions 40 mm x 40 mm x 20 mm. Addressing via QR code reading and built-in short-circuit isolator.
Specifications
Downloads
Algorithmic detection panel for NETCOM® 1-loop network RAX LX1
Algorithmic detection panel for NETCOM® single-loop network. USB/Bluetooth/WiFi/4G.
Algorithmic detection panel for NETCOM® single-loop network with capacity for up to 120 devices, 2.7″ multi-language TFT touchscreen with log capacity for up to 10,000 events, 2 programmable 24V monitored I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 200 mm x 290 mm x 80 mm. CPR EN54-2, EN54-4, EN54-13 and EN54-21 certified. Requires two 12 V/2 Ah batteries (not included).
1-Loop Algorithmic Detection Panel BX1-2PRO
1-Loop algorithmic detection panel, expandable to 2, with capacity for up to 350 devices per loop. USB/Bluetooth/Ethernet/WiFi/4G touchscreen display.
1-Loop algorithmic detection panel, expandable to 2 loops via loop card (ref. TLBX), with capacity for up to 350 devices per loop, with connection to NETCOM® panel network via network card (Ref. T-NETCOM), 2.7″ multi-language TFT touchscreen display with logging of up to 10,000 events, 2 supervised 24V programmable I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via USB port and/or onboard Bluetooth without the need for an additional card. Communications for remote management and access to the Nusku® platform via included Ethernet and Wifi ports, and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 360 mm x 400 mm x 100 mm. CPR certified EN54-2, EN54-4, EN54-13 and EN54-21. Requires two 12 V/7 Ah batteries (not included).
