Mini analogue module with 1 relay output MOXO
Mini analogue module with 1 relay output
Mini analogue module with 1 relay output programmable as NO or NC contact. Max. current 1A. For installation in LX and BX panel loops. No external power supply required. Supplied with white box. Dimensions 40mm x 40mm x 20mm. Addressing via QR code reading and built-in short-circuit isolator.
Specifications
Downloads
Productos relacionados
Resettable analogue alarm push button WXCPIP
Red resettable analogue alarm push button with LED and cover for outdoor use, IP65
Resettable analogue red alarm call point with LED and cover, surface-mounted, CPR EN54-1 certified. IP65. Addressing via QR code reading and features a built-in short-circuit isolator.
Specifications
Downloads
LX1 1-Loop Algorithmic Detection Panel
1-loop algorithmic detection panel with capacity for up to 250 devices. USB/Bluetooth/Ethernet/WiFi/4G touchscreen display.
1-loop algorithmic detection panel with capacity for up to 250 devices, a 2.7″ multi-language TFT touchscreen display with up to 10,000 event logs, and 2 supervised 24V programmable I/O. 300mA. 2 independent relay outputs for alarm/fault. Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required.
Communications for remote management and access to the Nusku® platform via included Ethernet and Wi-Fi ports, with optional 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 360 mm x 400 mm x 100 mm. CPR certified EN54-2, EN54-4, EN54-13 and EN54-21. Requires two 12 V/7 Ah batteries (not included).
Analog module with 3 inputs MDX3I
Technical 3-input analogue module
Analogue module with 3 programmable inputs for receiving technical signals from NO or NC contacts. For installation in LX and BX panel loops. Occupies 3 addresses in the loop. No external power supply required.
Supplied with white box. Dimensions: 150 mm x 110 mm x 46 mm. Addressing via QR code reading, occupies 3 addresses in the loop and has a built-in short-circuit isolator.
Conventional detection panel for NETCOM® 4-zone network RAX CX4
Conventional detection panel for NETCOM® 4-zone network. USB/Bluetooth/WiFi/4G.
Conventional detection panel for NETCOM® network with 4 zones up to 32 elements per zone, discriminating between push-button and detector alarms, 2.7″ multi-language TFT touch screen with up to 10,000 event log entries, 2 programmable 24V supervised I/O. 300mA. 2 independent relay outputs for alarm/fault.
Configuration and commissioning via onboard USB and/or Bluetooth port, no additional card required. Communications for remote management and access to the Nusku® platform via the included Wi-Fi port and optionally with a 4G module (ref. W4G). MODBUS protocol available via Ethernet port.
White RAL 9010 ABS plastic enclosure for surface or flush mounting. Dimensions: 200 mm x 290 mm x 80 mm. CPR EN54-2, EN54-4, EN54-13 and EN54-21 certified. Requires two 12 V/2 Ah batteries (not included).
